91视频 - 8MAV,美女张开大腿让男人插,天天干干天天干干干天射,日韩亚洲免费在线

產品詳情

  • 產品名稱：ComplementFragment3a(C3a) ELISA Kit

  • 產品型號：
  • 產品廠商：國內供應1
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
ComplementFragment3a(C3a) ELISA Kit
詳情介紹：
Purpose The kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of C3a in porcine serum, plasma and other biological fluids.
Sample Type Biological Fluids, Plasma, Serum
Analytical Method Quantitative
Detection Method Colorimetric
Specificity This assay has high sensitivity and excellent specificity for detection of this index.
Cross-Reactivity (Details) No significant cross-reactivity or interference between this index and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross- reactivity detection between this index and all the analogues, therefore, cross reaction may still exist.
Sensitivity 0.27 ng/mL
Components
  • Pre-coated, ready to use 96-well strip plate
  • Standard (freeze dried)
  • Standard Diluent
  • Detection Reagent A
  • Detection Reagent B
  • Assay Diluent A
  • Assay Diluent B
  • TMB
  • Stop Solution
  • Wash Buffer (30X)
  • Plate sealer for 96 wells
  • Instruction manual
Material not included
  1. Microplate reader with 450 ± 10nm filter.
  2. Precision single or multi-channel pipettes and disposable tips.
  3. Eppendorf Tubes for diluting samples.
  4. Deionized or distilled water.
  5. Absorbent paper for blotting the microtiter plate.
  6. Container for Wash Solution.
Alternative Name Complement Component 3a (C3a) (C3a ELISA Kit Abstract)
Sample Volume 100 μL
Assay Time 1 - 4.5 h
Plate Pre-coated
Protocol 1. Prepare all reagents, samples and standards
2. Add 100 μL standard or sample to each well. Incubate 2 hours at 37 °C
3. Aspirate and add 100 μL prepared Detection Reagent A. Incubate 1 hour at 37 °C
4. Aspirate and wash 3 times
5. Add 100 μL prepared Detection Reagent B. Incubate 30 minutes at 37 °C
6. Aspirate and wash 5 times
7. Add 90 μL Substrate Solution. Incubate 15-25 minutes at 37 °C
8. Add 50 μL Stop Solution. Read at 450nm immediately.
Assay Procedure

The microtiter plate provided in this kit has been pre-coated with an antibody specific to the index. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific to the index. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain the index, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of the index in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Assay Precision
  • Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
  • Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
  • CV(%) = SD/meanX100
  • Intra-assay: CV<10%
  • Inter-assay: CV<12%
Restrictions For Research Use only
Precaution of Use The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Handling Advice The stability of ELISA Kit is determined by the loss rate of activity. The loss rate of this kit is less than 5?% within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Storage 4 °C,-20 °C
Storage Comment The Assay Plate, Standard, Detection Reagent A and Detection Reagent B should be stored at -20°C upon being received. After receiving the kit , Substrate should be always stored at 4°C.Other reagents are kept according to the labels on vials. But for long term storage, please keep the whole kit at -20°C. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. The test kit may be used throughout the expiration date of the kit (six months from the date of manufacture). Opened test kits will remain stable until the expiring date shown, provided it is stored as prescribed above.
Expiry Date 12 months
Supplier Images
ELISA image for Complement Fragment 3a (C3a) ELISA Kit (ABIN1568713) Typical Standard Curve
免费 无码 国产真人视频九色| 亚洲图片一区视频| 欧美日韩熟妇| 国产超 碰av| 欧美日韩深喉母狗国产| 美女调弄鸡巴| 欧美久久不射网站| 岛国精品综合一区| 99午夜免费视频| 九九av一区二区三区| 超碰人人看大香蕉| 亚洲 成人 综合 另类 在线| 黄色呦呦免费| 一区二区在钱| 国产色欲二区| 中文国产欧美| 狼友精品| 亚洲欧美一区二区一道本| 日韩无码欧美肉棒| 国产极品福利一区| 操逼操逼啊啊啊| 欧美激情偷拍家庭| 精品少妇爆乳一区二区三区| 亚洲欧美在线视频图区| 日韩美女 一区| 久久久久久久高潮视频| av无码伊人色| 激情综合加勒比| 福利视频无码成人网| 天天插天天日天天摸| 久久久久久久韩国日本| 91久在线播放| 夜夜骑夜夜骑一区二区三区| 日本在线观看中文字幕视频| 一区欧美精品| 日韩逼逼视频| 精品久久久久九九人妻| 香蕉视频欧美三区| 黑人久久久久久久久| 欧美精品一区二区三区在线麻豆欧美| 欧美国产日韩乱伦第一页|