91视频 - 8MAV,美女张开大腿让男人插,天天干干天天干干干天射,日韩亚洲免费在线

產品詳情
  • 產品名稱:HumanL182Array,Membrane

  • 產品型號:
  • 產品廠商:RayBiotech
  • 產品文檔:
你添加了1件商品 查看購物車
簡單介紹:
HumanL182Array,Membrane
詳情介紹:
Purpose L-Series Human Obesity Antibody Array 182 Membrane Kit. Detects 182 Human Adipokines. Suitable for Cell culture supernatants.
Brand RayBio?
Sample Type Plasma, Cell Culture Supernatant, Serum
Analytical Method Semi-Quantitative
Detection Method Chemiluminescent
Specificity ACE / CD43, ACE-2, ACTH, ADFP, Adiponectin, Adipsin (Factor D), AgRP , AMPKa1 , Amylin, Angiopoietin 1, Angiopoietin 2, Angiotensinogen / Angiotensin II, Ang-like Factor, ANGPTL1, ANGPTL2, ANGPTL3, ANGPTL4 , Apelin Receptor , ApoB, ApoE, Axl, BDNF, bFGF, BMP-2 , BMP-3, BMP-3b / GDF-10, BMP-4 , BMP-5, BMP-6, BMP-7, BMP-8, BMP-15, BMPR-IA / ALK-3, BMPR-IB / ALK-6, BMPR-II, b-NGF, C3a des Arg, CART , CD137 (4-1BB), CD36, Clusterin, CNTF, C-peptide, CRP , Cystatin C, Dtk, EGF, EGFR, ENA-78, Endophin Beta, Epiregulin, E-selectin, ET-1 (Endothelin), FABP4, FAM3B, FAS / Apo-1, FGF-10, FGF-6, FSH , Galectin -1, Growth Hormone (Growth Hormone), Ghrelin, GITR, GITR Ligand, GLP-1 , Glucagon, Glut1, Glut2, Glut3, Glut5, Glutathione peroxidase 1, Glutathione peroxidase 3, GRO alpha, HCC4, HGF, HSD-1, ICAM1, IFN-gamma, IGF-1, IGF-1 sR, IGFBP-1, IGFBP-2, IGFBP-3, IGF-2, IL-1 R1, IL-1 R4, IL-1a, IL-1b, IL-1 ra, IL-6, IL-6 sR, IL-8, IL-10, IL-11, IL-12, IL-25 / IL-17E, INSL3, INSRR , Insulin, Insulin R (CD220), Leptin, Leptin R, LH (Luteinizing Hormone), LIF, LOX, Lymphotactin, MCP-1, MCP-3, M-CSF, MIF, MIP-1 alpha, MIP-1 beta, MIP-3b, MMP-2, MMP-9, MMP-11, MMP-19, MSHa , MSPa, Myostatin, NAIP, NeuroD1, Neurophilin-2, NGF R, NPY (Neuropeptide Y), Obestatin R (GPR-39), Orexin A, Orexin B, OSM, Osteocalcin, Osteonectin , Osteoprotegerin, PARC, PDGF, PDGF-AA, PDGF-AB, PDGF-C, PDGF-D, PEDF , Pentraxin-3, PPARg2 / NRIC3, Pref-1 , Prohibitin, Prolactin, PYY , RANTES, RBP4 , RELMb , Resistin, S100, S100 A8+A9, S100 A10, SAA , SDF-1, SEMA3A, Serotonin, Syndecan-3, TACE, TDAG51 , TECK, TGF alpha, TGF-b, Thrombospondin 1, Thrombospondin 2, Thrombospondin 4, TIMP-1, TIMP-2, TIMP-3, TIMP-4, Tissue factor (CD142), TLR2, TLR4, TNF alpha, sTNFRI, sTNFRII, TSG-6 , TSH , Vaspin, VCAM-1, VEGF-A, Visfatin/PBEF1, XEDAR
Characteristics
  • High density arrays
  • 182 Human proteins
  • Direct biotin labeling of proteins
  • High detection sensitivity
  • Accurate and reproducible
  • Affordable, quick and simple to use
Components L-Series Antibody Array Membranes or Glass Slides
Spin Columns / Dialysis Tube
Labeling Reagent
Stop Solution
Blocking Buffer
Streptavidin-Conjugated HRP or Streptavidin-Conjugated HiLyte Fluor 532
Wash Buffer 1
Wash Buffer 2
Plastic Sheets
Floating Dialysis Rack
Plastic Incubation Tray
Detection Buffer C
Detection Buffer D

*Accessories include: 2-well or 4-well incubation chamber with gasket, protective cover, snap-on sides, adhesive film
Material not included Distilled or de-ionized water
KCl, NaCl, KH2PO4 and Na2HPO4
Small plastic or glass containers
Orbital shaker or oscillating rocker
Beaker, stir plate and stir bar
1?mL tube
Pipettors, pipette tips and other common lab consumables
Laser scanner for fluorescence detection (list of compatible scanners available at http://www.raybiotech.com/resources.asp)
Aluminum foil
Application Notes Completely cover membranes with sample or buffer during incubation and cover Plastic Incubation Tray with lid to avoid drying. Avoid foaming during incubation steps. Perform all incubation and wash steps under gentle rotation. Several incubation steps such as step 3 in page 10 (sample incubation) or step 7 in page 11 (HRP-Conjugated Streptavidin incubation) may be done at 4?°C for overnight.
Comment

The L-series arrays utilize direct labeling for signal detection, wherein the antigen is tagged with biotin prior to incubation with the capture antibody. The signal is then developed with a streptavidin-conjugated HRP or fluor. Since this array requires only a single antibody per target molecule (as opposed to an antibody pair), any possibility of interactions between antibodies within the same array panel is eliminated. Thus, an unlimited number of antibodies may theoretically be included in each panel, making this array platform ideal for high-content screening of protein expression.
The capture antibodies for L-Series may be spotted on either glass slide or membrane.

Sample Volume 100 μL
Plate Membrane,Glass Slide
Protocol
  1. Dialyze samples in PBS
  2. Biotinylate Samples
  3. Dialyze biotinylated Samples in PBS
  4. Block array membranes
  5. Incubate with Samples
  6. Incubate with HRP-Conjugated Streptavidin
  7. Incubate with Detection Buffers
  8. Image with chemiluminescent imaging system
  9. Perform densitometry and analysis
Sample Preparation

Preparation of Samples

- Seed cells at a density of 1x106 cells in 100 mm tissue culture dishes.
- Culture in complete culture medium for ~24-48 hours.
- Replenish with serum-free or low-serum medium, such as 0.2% FCS/FBS, and then re-incubate cells for ~48 hours
- Collect the cell culture supernatant and centrifuge at 1,000 g for 10 minutes and store in ≤1 ml aliquots at -80 °C until needed.
- Measure the total wet weight of the cultured cells in the pellet and/or culture dish. Normalize between arrays by dividing fluorescent signals by total cell mass (i.e., express results as the relative amount of protein expressed/mg total cell mass). Normalization can also be done between arrays by determining the total protein concentration using a total protein assay.

Dialyse of Samples
- Prepare dialysis buffer (1X PBS) by dissolving 0.6 g KCl, 24 g NaCl, 0.6 g KH2PO4 and 3.45 g Na2HPO4 in 2500 ml de-ionized or distilled water. Adjust to a pH of 8.0 with 1M NaOH and adjust final volume to 3000 ml with de-ionized or distilled water.
- Load each sample into a separate Dialysis Vials (Item A), 2.5-3.0 ml of sample per vial for dialyzing. Carefully place all Dialysis Vials into the Floating Rack.
- Place the Floating Rack into ≥500 ml dialysis buffer in a large beaker. Place beaker on a stir plate and dialyze for at least 3 hours at 4°C, occasionally gently stirring the dialysis buffer. Then exchange the dialysis buffer with fresh buffer and repeat dialysis for at least 3 hours at 4 °C. Transfer dialyzed samples into a clean eppendorf tube. Centrifuge dialyzed samples for 5 minutes at 10,000 rpm to remove any particulates or precipitates and then transfer and combine each sample into one clean eppendorf tube. Mix well by gently pipetting.

Biotin-labeling of Sample
- Immediately before use, prepare 1X Labeling Reagent by briefly centrifuging down the Labeling Reagent vial (Item B) and add 100 μl 1X PBS (pH=8.0) into the vial. Pipette up and down or vortex briefly to dissolve the powder.
- Add an appropriate amount
of 1X Labeling Reagent into the tube containing the sample and immediately mix the reaction solution. Incubate the reaction solution at room temperature for 30 minutes with gentle shaking. Gently tap the tube to mix the reaction solution every 5 minutes.

Assay Procedure

Blocking and Incubation
7. Place each membrane printed side up into a Plastic Incubation Tray (provided). 1 membrane per tray.
Note: The printed membrane will have a “-” mark in the upper left corner of the membrane.
8. Add 8 ml of Blocking Buffer (Item F) to each membrane and cover with the lid. Incubate at room temperature with gentle shaking for 1 hour.
9. Aspirate Blocking Buffer from each tray. Add 8 ml of diluted* or undiluted sample onto each membrane and cover with the lid. Incubate at room temperature with gentle shaking for 2 hours.
Note: 1). It is recommended to use 8 ml of 5-fold diluted biotinlabeled cell culture supernatant. Dilute sample using Blocking Buffer.
Note: 2). The concentration of sample used depends on the abundance of proteins. The samples can be concentrated if the overall signals are too weak. If the overall signals are too strong, the sample can be diluted further.
Note: 3). Incubation may be done at room temperature withgentle shaking for 2 hours or overnight at 4°C.
10. Dilute 20X Wash Buffer 1 with deionized or distilled water to prepare the 1X Wash Buffer 1. Aspirate the samples from each tray and then wash by adding 20 ml of 1X Wash Buffer I at room temperature with gentle shaking (5 min per wash). Repeat the wash 2 more times for a total of 3 washes.
11. Aspirate the 1X Wash Buffer 1 from each tray. Dilute 20X Wash Buffer 2 with deionized or distilled water to prepare the 1X Wash Buffer 2. Wash 3 times with 20 ml of 1X Wash Buffer 2 at room temperature with gentle shaking.
12. Aspirate the 1X Wash Buffer 2 from each tray. Dilute the 500X HRP-Conjugated Streptavidin with Blocking Buffer to prepare the 1X HRP-Conjugated Streptavidin. Add 8 ml of 1X HRPConjugated Streptavidin to each membrane.
Note: Ensure that the vial containing the 500X HRP-Conjugated Streptavidin is mixed well before use, as precipitation can form during storage.
13. Incubate at room temperature with gentle shaking for 2 hours.
Note: incubation may be done at 4 °C for overnight.
14. Wash as directed in steps 10 and 11.

Detection
Do not let the membrane dry out during detection. The detection process must be completed within 40 minutes without stopping.
15. For detection of 2 membranes, add 4.2 ml of Detection Buffer C and 4.2 ml of Detection buffer D into a tube and mix both solutions. Drain off excess wash buffer. Place membrane antibody side up (“-” symbol is marked in the top left corner of each membrane) on a clean plastic plate or its cover (provided in the kit). Pipette 4 ml of the mixed Detection Buffers on to each membrane and incubate at room temperature for 2 minutes with gentle shaking. Ensure that the detection mixture is evenly covering the membrane without any air bubbles.
16. Gently place the membrane with forceps (antibody side up) on a plastic sheet (provided) and cover the membrane with another plastic sheet. Gently smooth out any air bubbles. Avoid using pressure on the membrane. Work as quickly as possible.
17. The signal can be detected directly from the membrane using a chemiluminescence imaging system or by exposing the array to x-ray film (we recommend using Kodak X-Omat? AR film) with subsequent development. Expose the membranes for 40 seconds. Then re-expose the film according to the intensity of signals. If the signals are too strong (background too high),reduce exposure time (eg, 5–30 seconds). If the signals are too weak, increase exposure time (eg, 5–20 min or overnight). Or re-incubate membranes overnight with 1X HRP-Conjugated Streptavidin, and repeat detection on the second day.
18. Save membranes at –20 °C to –80 °C for future reference.

Calculation of Results

To obtain optimal results, it is suggested to try several different exposure times until the best one is determined. Then, by comparing the signal intensities, relative expression levels of the target proteins can be made. The intensities of signals can be quantified by densitometry. Anti-HRP (P-1a, P-2a, P-3a) and antistreptavidin (P-1b, P-2b, P-3b) will produce positive control signals, which can be used to identify the orientation and help normalize the results from different arrays being compared. Antibody affinity to its target varies significantly between antibodies. The intensity detected on the array with each antibody depends on this affinity; therefore, signal intensity comparison can be performed only within the same antibody/antigen system and not between different antibodies.

The RayBio? Analysis Tool is a program specifically designed for analysis of RayBio? L-Series Antibody Arrays. This tool will not only assist in compiling and organizing your data, but also reduces your calculations to a “copy and paste.”

Restrictions For Research Use only
Handling Advice Always use forceps to handle membranes and grip the membranes by the edges only. Never allow membranes to dry during the experiment. Avoid touching membranes with hands or any sharp tools.
Storage 4 °C/-20 °C
Storage Comment For best results, store Box 1 frozen at -20°C and Box 2 at 4°C upon arrival. Stored this way the kit will be stable for at least 6 months which is the duration of the product warranty period. Once thawed, store array membranes and internal control at -20°C and all other reagents undiluted at 4°C for no more than 3 months.
Expiry Date 6 months
久久精品R片| 国产精品麻豆三级一区视频| 日韩美女少妇| 91精品在线视频免费观看蜜臀| 一级大片日韩欧美| 少妇 后入 在线观看| 91成人福利视频午夜| 成人亚洲A片Ⅴ一区二区电影| 麻豆久久久久久久久丝袜| 欧美第十页| 日本无码人妻丰满熟妇| 殴美黄色在线| www.草逼逼| 欧美黑人大吊| 红桃一区二区永久入口| 99人妻人人| 欧美一区二区久久久久久久| 搜狐久久精品a国产一级| 久久久精品免费蜜| 精品福利导航| 久久久三级片欧美| 久久免费看少妇高潮a不卡| 国产一级特黄录像片| 精品爆乳久久综合| 欧美东欧一级黄片| 30人人人免费操工开| 欧美综合精品一区二区三区| 国产黄色成年| 三级国产三级在线| 韩欧美亚洲综合久久| AV天堂资源中文| 久在线con| 日韩,欧美,国产,国产国| 少妇高潮7777777| 男的鸡插入美女小穴电影| 色花堂完整视频观看| 精品国产天天色| 男人的天堂欧美在线| 又大又粗又嫩的网站| 淫荡人妻电影院| 日本很很干系列一区二区不卡系列 |